Yamaha Tenere 700 – Ultimate Adventure Combo

Crash Bars Combo (Lower and Upper)

Thanks to the four mounting points each side, we could utilize 22mm diameter tubing. The result is 2.7kg for the lower crash bars and only 5.6kg for both upper and lower crash bars together!

We’e also developed our own skid plate

We don’t guarantee colour matching between our crash bars’ colours and parts of your Yamaha Tenere 700. We however offer the closest possible.

Features

• Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
• 22mm steel tube with 2mm wall thickness.
• Less is often more – One of our goals was to preserve the low centre of gravity feature of the Yamaha Tenere 700
• Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm and 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars/Euros.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Skid Plate

• Protects crucial areas of the engine – oil pan, engine case,  oil filter and the exhaust headers, side stand sensor and rear suspension linkage! That’s a long list of very expensive parts to expose to any sort of damage that could potentially end your ride and leave you stranded.
• Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris, mud from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
• True off-road and adventure shape – We avoid designing skid plates that are shaped like boxes, have sharp edges and corners and will guaranteed to restrict your rides off road.
• 4mm thick laser cut aluminum – It’s thick enough to withstand potential damage, yet lightweight.
• Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

Pannier Racks

Standard Pannier Racks

Designed and manufactured by Outback Motortek. Hoop’s external dimension are 350mm (W) x 250 (H) made of 18mm diameter tubing. Symmetrical design. Full width of the pannier racks installed: 610mm.
Compatible with:

• Mosko Moto Backcountry 35 >> Shop
• Mosko Moto Scout 25L Pannier kit (V2.0) >> Shop
• Kriega OS 22 and OS 32 with OS-PLATFORM
• Giant Loop MotoTrekk and RTW
• Wolfman
• Enduristan Monsoon 3
• LoneRider MotoBags
• EMD Adventure Gear – ASKJA 34

X-Frame

You can even remove the X-Bracket from your frames when running Hard Luggage to reduce the frame weight.

Compatible with:

• Kriega OS-32 without OS Platform
• Giant Loop MotoTrekk and RTW
• Wolfman
• Enduristan Monsoon 3

Rear Luggage Rack

• 4mm thick aluminum
• Compatible with Rotopax fuel or water cans
• Multiple holes to allow straps to securely keep luggage in place
• Compatible with Mosko Moto Reckless 80 pannier system

Passenger grab handle

• 18mm diameter, lightweight tubing
• frame mounted
• low profile design